PCOGUN
Refractory gunning concretes
The PCOGUN line of masses is designed to be easy to apply and adhere well to the existing lining. The products are characterized by specially selected granulation and contain additives that minimize material loss during spraying (reduced rebound).
The proper selection of refractory material for a specific application requires an appropriate analysis of the device's operating conditions. Before choosing the type of material, contact our specialist to confirm its suitability for your furnace.
| Value: | AL2O3 (%) | SiO2 (%) | Other specific components (%) | Bulk density [g/cm3] | Cold crushing strength (N/mm2) |
Maximum application temperature (°C) |
|---|---|---|---|---|---|---|
| Standard: | ISO 1927-3 | ISO 1927-3 | ISO 1927-3 | ISO 1927-6 | ISO 1927-6 | ISO 1927-6 |
| PCOGUN NGB135 | 42,00 | 44,00 | 1,95 | 20 | 1 350 | |
| PCOGUN NGB145 | 46,00 | 42,00 | 2,00 | 25 | 1 450 | |
| PCOGUN SIC 30/35 | 38,00 | SiC – 30,0 | 2,10 | 35 | 1 200 | |
| PCOGUN 135S | 46,00 | 44,00 | 2,00 | 28 | 1 300 | |
| PCOGUN 145N | 48,00 | 42,00 | 2,00 | 40 | 1 450 | |
| PCOGUN 150M | 50,00 | 39,00 | 2,05 | 30 | 1 500 | |
| PCOGUN 150MS5 | 50,00 | SiC – 5,0 | 2,10 | 35 | 1 450 | |
| PCOGUN 155AZS | 50,00 | SiC – 10,0; ZrO2 – 10,0 | 2,30 | 35 | 1 500 |
The values presented are for informational purposes only and are typical for the indicated types of refractory products. These values correspond to the average results obtained in current production and are subject to fluctuations typical for the production process. PCO "Żarów" reserves the right to modify the properties of the products at any time without prior notice.
Contact us
Please select the option that best describes the subject you want to discuss with us. This will help us direct your inquiry to the right person at PCO.