ABRAL
The ABRAL product line consists of silicon carbide bricks based on raw materials from chamotte and andalusite. They are characterized by increased resistance to wear and corrosion (alkali influence).
The proper selection of refractory material for a specific application requires an appropriate analysis of the device's operating conditions. Before choosing the type of material, contact our specialist to confirm its suitability for your furnace.
| Valur: | AL2O3 (%) | Fe2O3 (%) | Other specific components (%) | Bulk density[g/cm3] | Apparent porosity [%] | Cold crushing strength (N/mm2) |
|---|---|---|---|---|---|---|
| Standard: | ISO 12677 | ISO 12677 | ISO 12677 | EN 993-1 | EN 993-1 | EN 993-5 |
| ABRAL A40S5 | 42,00 | 1,50 | SiC – 5% | 2,35 | 14 | 50 |
| ABRAL A40S10 | 42,00 | 1,50 | SiC – 10% | 2,35 | 13 | 60 |
| ABRAL A45S5 | 45,00 | 1,50 | SiC – 5% | 2,40 | 14 | 60 |
| ABRAL A45S20 | 45,00 | 1,30 | SiC – 20% | 2,65 | 12 | 65 |
| ABRAL A50S5 | 50,00 | 1,30 | SiC – 5% | 2,50 | 14 | 60 |
| ABRAL A50S10 | 50,00 | 1,30 | SiC – 10% | 2,55 | 13 | 65 |
| ABRAL A50S15 | 50,00 | 1,30 | SiC – 15% | 2,55 | 13 | 70 |
| ABRAL A55S10 | 57,00 | 1,10 | SiC – 10% | 2,65 | 13 | 70 |
| ABRAL A60S5 | 60,00 | 1,00 | SiC – 5% | 2,65 | 13 | 70 |
| ABRAL A60S10 | 62,00 | 1,00 | SiC – 10% | 2,60 | 14 | 70 |
| ABRAL AK80s10 | 81,00 | 1,00 | SiC – 10% | 2,95 | 13 | 100 |
The values presented are for informational purposes only and are typical for the indicated types of refractory products. These values correspond to the average results obtained in current production and are subject to fluctuations typical for the production process. PCO "Żarów" reserves the right to modify the properties of the products at any time without prior notice.
Contact us
Please select the option that best describes the subject you want to discuss with us. This will help us direct your inquiry to the right person at PCO.