ISOCAST
Insulating refractory castables
Insulating concretes in the ISOCAST line are available in versions with densities ranging from 0.6 to 1.4 g/cm³ and are designed to operate in temperature ranges from 600 °C to 1450 °C. They are produced based on lightweight clays and shales. Although not as durable as dense concretes, they still provide sufficient mechanical strength for many applications in insulating layers of refractory linings.
The proper selection of refractory material for a specific application requires an appropriate analysis of the device's operating conditions. Before choosing the type of material, contact our specialist to confirm its suitability for your furnace.
| Value: | AL2O3 (%) | SiO2 (%) | Other specific components (%) | Bulk density [g/cm3] | Cold crushing strength (N/mm2) |
Maximum application temperature (°C) |
|---|---|---|---|---|---|---|
| Standard: | ISO 1927-3 | ISO 1927-3 | ISO 1927-3 | ISO 1927-6 | ISO 1927-6 | ISO 1927-6 |
| ISOCAST BI-9/0,8 | 15,00 | 42,00 | 800 | 3,8 | 900 | |
| ISOCAST BI-11/0,9 | 25,00 | 43,00 | 950 | 6,0 | 1 100 | |
| ISOCAST BI-11/1,3 | 28,00 | 43,00 | 1 320 | 11,0 | 1 100 | |
| ISOCAST BI-12/0,9 | 35,00 | 950 | 4,0 | 1 200 | ||
| ISOCAST BI-13/1,3 | 38,00 | 46,00 | 1 450 | 9,0 | 1 300 | |
| ISOCAST BI-14/1,4 | 44,00 | 43,00 | 1 520 | 16,0 | 1 360 | |
| ISOCAST BI-15/1,2 | 78,00 | 10,00 | 1 370 | 10,0 | 1 450 |
The values presented are for informational purposes only and are typical for the indicated types of refractory products. These values correspond to the average results obtained in current production and are subject to fluctuations typical for the production process. PCO "Żarów" reserves the right to modify the properties of the products at any time without prior notice.
Contact us
Please select the option that best describes the subject you want to discuss with us. This will help us direct your inquiry to the right person at PCO.