MORTALEX
Dry heatset refractory mortars
The dry refractory mortar line MORTALEX is designed to supply an appropriate mortar for every type of brick produced by PCO. Such a combination ensures uniform properties in every layer of the lining. Ceramic bond (headset) mortars require mixing with water, and the bond gains strength only after the lining is heated to a specified temperature.
The proper selection of refractory material for a specific application requires an appropriate analysis of the device's operating conditions. Before choosing the type of material, contact our specialist to confirm its suitability for your furnace.
| Value: | AL2O3 (%) | SiO2 (%) | Other specific components (%) | Bulk density [g/cm3] | Cold crushing strength (N/mm2) |
Maximum application temperature (°C) |
|---|---|---|---|---|---|---|
| Standard: | ISO 1927-3 | ISO 1927-3 | ISO 1927-3 | ISO 1927-6 | ISO 1927-6 | ISO 1927-6 |
| MORTALEX ZSz0 | 40,00 | 55,00 | 1 450 | |||
| MORTALEX ZSz1 | 34,00 | 55,00 | 1 400 | |||
| MORTALEX ZAL42 | 42,00 | 50,00 | 1 500 | |||
| MORTALEX ZAL50 | 48,00 | 46,00 | 1 500 | |||
| MORTALEX ZAL60 | 47,00 | 48,00 | 1 500 | |||
| MORTALEX ZAND | 60,00 | 32,00 | 1 600 | |||
| MORTALEX ZAK95 | 91,00 | 5,00 | 1 600 |
The values presented are for informational purposes only and are typical for the indicated types of refractory products. These values correspond to the average results obtained in current production and are subject to fluctuations typical for the production process. PCO "Żarów" reserves the right to modify the properties of the products at any time without prior notice.
Contact us
Please select the option that best describes the subject you want to discuss with us. This will help us direct your inquiry to the right person at PCO.