PCOCAST BOS
Conventional refractory castable
Conventional refractory concrete, with a high cement content (15-30%), is the easiest to install (correct mixing and drying) among casting concrete. Although they do not provide the highest performance in extreme conditions, they are a versatile and cost-effective choice for many standard operating conditions in refractory linings.
The proper selection of refractory material for a specific application requires an appropriate analysis of the device's operating conditions. Before choosing the type of material, contact our specialist to confirm its suitability for your furnace.
| Value: | AL2O3 (%) | SiO2 (%) | Other specific components [%] | Bulk density [g/cm3] |
Cold crushing strength @ 110 °C [N/mm2] |
Maximum application temperature [°C] |
|---|---|---|---|---|---|---|
| Standard: | ISO 1927-3 | ISO 1927-3 | ISO 1927-3 | ISO 1927-6 | ISO 1927-6 | ISO 1927-6 |
| PCOCAST BOS125 | 34,00 | 46,00 | – | 1,90 | 25 | 1250 |
| PCOCAST BOS135 | 40,00 | 45,00 | – | 1,95 | 40 | 1350 |
| PCOCAST BOS145 | 42,00 | 42,00 | – | 2,05 | 40 | 1350 |
| PCOCAST BA150 | 61,00 | 31,00 | – | 2,35 | 50 | 1450 |
The values presented are for informational purposes only and are typical for the indicated types of refractory products. These values correspond to the average results obtained in current production and are subject to fluctuations typical for the production process. PCO "Żarów" reserves the right to modify the properties of the products at any time without prior notice.
Contact us
Please select the option that best describes the subject you want to discuss with us. This will help us direct your inquiry to the right person at PCO.