RESIMAX
The RESIMAX line includes our acid-resistant bricks. These products are characterized by low susceptibility to erosion during sulfuric acid testing (1.5% to a maximum of 2.5% lining mass loss).
The proper selection of refractory material for a specific application requires an appropriate analysis of the device's operating conditions. Before choosing the type of material, contact our specialist to confirm its suitability for your furnace.
| Valur: | AL2O3 (%) | Fe2O3 (%) | Other specific components (%) | Bulk density[g/cm3] | Apparent porosity [%] | Cold crushing strength (N/mm2) |
|---|---|---|---|---|---|---|
| Standard: | ISO 12677 | ISO 12677 | ISO 12677 | EN 993-1 | EN 993-1 | EN 993-5 |
| RESIMAX KW2 | 32,00 | 1,50 | Al2O3 – max. 35% | 2,05 | 15 | 50 |
| RESIMAX S4 | 30,00 | 1,50 | Al2O3 – max. 33% | 2,05 | 12 | 60 |
| RESIMAX S4-II | 30,00 | 1,50 | Al2O3 – max. 33% | 2,10 | 12 | 70 |
The values presented are for informational purposes only and are typical for the indicated types of refractory products. These values correspond to the average results obtained in current production and are subject to fluctuations typical for the production process. PCO "Żarów" reserves the right to modify the properties of the products at any time without prior notice.
Contact us
Please select the option that best describes the subject you want to discuss with us. This will help us direct your inquiry to the right person at PCO.