ALPLAST, ALKOPLAST
Moist high alumina repair masses
Moist refractory masses based on high-alumina raw materials are intended for minor current repairs of high-alumina masonry. They are supplied loose in bags or as lumps for ramming with a hammer.
The proper selection of refractory material for a specific application requires an appropriate analysis of the device's operating conditions. Before choosing the type of material, contact our specialist to confirm its suitability for your furnace.
| Value: | AL2O3 (%) | SiO2 (%) | Other specific components (%) | Bulk density [g/cm3] | Cold crushing strength (N/mm2) |
Maximum application temperature (°C) |
|---|---|---|---|---|---|---|
| Standard: | ISO 1927-3 | ISO 1927-3 | ISO 1927-3 | ISO 1927-6 | ISO 1927-6 | ISO 1927-6 |
| ALPLAST 62 | 62,00 | 36,00 | ||||
| ALKOPLAST 85c | 88,00 | 6,00 | P2O5 – 3,5 | |||
| ALKOPLAST 90 | 86,00 | 10,00 |
The values presented are for informational purposes only and are typical for the indicated types of refractory products. These values correspond to the average results obtained in current production and are subject to fluctuations typical for the production process. PCO "Żarów" reserves the right to modify the properties of the products at any time without prior notice.
Contact us
Please select the option that best describes the subject you want to discuss with us. This will help us direct your inquiry to the right person at PCO.