ALUTEX

Description

Products from the ALUTEX line are dedicated to applications in siphon systems used in metallurgy and steel casting. They are distinguished by low porosity and low water absorption.

The proper selection of refractory material for a specific application requires an appropriate analysis of the device's operating conditions. Before choosing the type of material, contact our specialist to confirm its suitability for your furnace.

Category /
Technical Specifications
Value: AL2O3 (%) Fe2O3 (%) Other specific components (%) Bulk density (g/cm3) Apparent porosity (%) Cold crushing strength (N/mm2) Refractoriness under load T0,5 [˚C] Thermal conductivity [W/mK] PN EN 993-15
Standard: ISO 12677 ISO 12677 ISO 12677 EN 993-1 EN 993-1 EN 993-5 EN ISO 1893 800 °C 1100 °C 1400 °C
ALUTEX A35L 36,00 2,30 2,05 23 1,30 1,40
ALUTEX AL42L 42,00 2,00 2,12 22 1,30 1,40
ALUTEX AL50L 51,00 1,95 2,35 22 1,90 2,10
ALUTEX AL55L 56,00 1,95 2,35 22 1,90 2,10
ALUTEX AL66L 67,00 1,90 2,32 22 2,00 2,10
ALUTEX AL72L 76,00 1,40 2,50 22 1,90 2,10
ALUTEX B80Lc 80,00 1,30 P2O5 – 1,6% 2,60 22 2,30 2,10

 

 

The values presented are for informational purposes only and are typical for the indicated types of refractory products. These values correspond to the average results obtained in current production and are subject to fluctuations typical for the production process. PCO "Żarów" reserves the right to modify the properties of the products at any time without prior notice.

Contact us

Have a question about our refractory materials, need technical support or a quotation? Write to us - your message will reach the right person at PCO and we will get back to you as soon as possible.

General contact
If you have any questions about our company or other questions not yet related to the purchase of products - write to us here!