MORTALEX D

Description

Dry airset refractory mortars

PCO offers air-setting mortars for every working temperature range. These mortars are supplied in dry form and applied by adding water and application. Unlike ceramic bond mortars, to achieve a durable joint, it is not necessary to heat the lining, as bonding occurs at room temperature.

The proper selection of refractory material for a specific application requires an appropriate analysis of the device's operating conditions. Before choosing the type of material, contact our specialist to confirm its suitability for your furnace.

Category Refractory castables, masses, and mortars / Refractory mortar
Technical Specifications
Value: AL2O3 (%) SiO2 (%) Other specific components (%) Bulk density [g/cm3] Cold crushing strength
(N/mm2)
Maximum application temperature (°C)
Standard: ISO 1927-3 ISO 1927-3 ISO 1927-3 ISO 1927-6 ISO 1927-6 ISO 1927-6
MORTALEX ZAL42 D 40,00 50,00 1 500
MORTALEX ZAL60 D 46,00 50,00 1 500
MORTALEX ZAND D 55,00 38,00 1 600
MORTALEX ZBDC 74,00 12,0 P2O5 – 3,5 1 500

The values presented are for informational purposes only and are typical for the indicated types of refractory products. These values correspond to the average results obtained in current production and are subject to fluctuations typical for the production process. PCO "Żarów" reserves the right to modify the properties of the products at any time without prior notice.

Contact us

Please select the option that best describes the subject you want to discuss with us. This will help us direct your inquiry to the right person at PCO.

Technical consultation
If you want to talk about a problem with your refractory lining performance or find out whether a specific product will be a good solution - send a message to our experts and they will advise you for free!

    Request for quotation
    Do you already know what products you need? Send us an inquiry and we will quickly price it and make you a commercial offer.

      Stock availability
      If you just want to find out whether we have the products you need in stock and available immediately, please use this form.

        Become a supplier
        If you work with production companies of similar profile to PCO Żarów and want to talk to us about your products or services, please use this form.

          General contact
          If you have any questions about our company or other questions not yet related to the purchase of products - write to us here!