PCOCAST BN, MULCAST BN

Description

Low cement refractory castables

Low cement castable concretes (LCC) require a minimal morstars content (from 3 to 10%) to achieve binding. As a result, they need more attention during installation than, for example, conventional concretes, but a well-made lining is characterized by improved parameters such as higher temperature resistance, lower porosity, resistance to corrosion and abrasion, and thermal shock resistance.

The proper selection of refractory material for a specific application requires an appropriate analysis of the device's operating conditions. Before choosing the type of material, contact our specialist to confirm its suitability for your furnace.

Category Refractory castables, masses, and mortars / Castable refractory
Technical Specifications
Value: AL2O3 (%) SiO2 (%) Other specific components (%) Bulk density [g/cm3] Cold crushing strength
(N/mm2)
Maximum application temperature (°C)
Standard: ISO 1927-3 ISO 1927-3 ISO 1927-3 ISO 1927-6 ISO 1927-6 ISO 1927-6
PCOCAST BN135N 47,00 46,00 2,25 55 1 350
PCOCAST BN145N 48,00 42,00 2,25 55 1 400
PCOCAST BNA 61,00 34,00 2,55 85 1 500
PCOCAST BNAK160 68,00 27,00 2,70 70 1 600
PCOCAST BNBOK160/EA 92,00 5,50 3,10 105 1 600
PCOCAST BN 160 AZS 51,00 SiC – 10,0; ZrO2 – 10,0 2,75 90 1 500
PCOCAST BN AB FL 68,00 27,00 2,65 90 1 600
MULCAST BN50M 50,00 45,00 2,35 90 1 500
MULCAST BN50M10Zr 45,00 44,00 ZrO2 – 8,0 2,50 75 1 500
MULCAST BN80M 81,00 16,00 2,70 80 1 600

 

The values presented are for informational purposes only and are typical for the indicated types of refractory products. These values correspond to the average results obtained in current production and are subject to fluctuations typical for the production process. PCO "Żarów" reserves the right to modify the properties of the products at any time without prior notice.

Contact us

Please select the option that best describes the subject you want to discuss with us. This will help us direct your inquiry to the right person at PCO.

Technical consultation
If you want to talk about a problem with your refractory lining performance or find out whether a specific product will be a good solution - send a message to our experts and they will advise you for free!

    Request for quotation
    Do you already know what products you need? Send us an inquiry and we will quickly price it and make you a commercial offer.

      Stock availability
      If you just want to find out whether we have the products you need in stock and available immediately, please use this form.

        Become a supplier
        If you work with production companies of similar profile to PCO Żarów and want to talk to us about your products or services, please use this form.

          General contact
          If you have any questions about our company or other questions not yet related to the purchase of products - write to us here!